HengXin steel silo

Rolling steel silo: After fixing the position of the equipments, rolling silo to 2m high;

steel silo,

Hengxin produces steel silo with special and advanced technology. During construction, rolling sheet with width of 495mm is rolled to required shape from coil opening machine to forming machine and then is bended and bitten to screw embossed strip with width of 30mm-40mm around outside of steel silo. Inside steel silo, the stiffener is welded with embedded plates to improve the strength of steel silo.Space structure technology is used in design of the silo framework to ensure the stability of big span, the angle is 25°with good strength.Equipment positioning: According to the diameter of steel silo, fixing the position of the equipments;Rolling silo: After fixing the position of the equipments, rolling silo to 2m high;Install silo roof: After cutting silo roof level with plasma cutter, installing the silo roof;Lifting silo: Lifting the rolling silo to required height;Fixing silo: Taking out the machines, fixing the silo with embedded plate;Installing other facility: The user design and installation of the selected form object.

  Will be on the loose coil winding machine loose on paper, through the coil bending machine, and the initial processing of forming the same time, the material bent in the required curvature, and then the crimping machine to bend with the good material to bite mouth, rolling forming, spiral upward through the bearing bracket lifting into the cylinder.

HengXin steel silo